Purchasing School of PE’s review course will significantly increase your chances of passing the PE exam and even double them if you’ve failed once or more. I know how good it is because I took it myself and passed! One of the most appealing things about School of PE is their high pass rates, and in this article, I’m going to dive into them.
The average pass rate for those that complete School of PE’s review course is 90% for the Civil PE and 88% for the Mechanical PE. For the FE, the School of PE average pass rate is 89%. The national average pass rates are about 65-70%, which makes School of PE a no-brainer if you want to pass the PE.
There’s a lot more to consider though. I haven’t even given the breakdown for each specific discipline yet, let alone compared pass rates for first-time test takers and repeat takers! Let’s explore these numbers further to see if School of PE is right for you.
As we get into it, note that this is the average for those who attended all classes and workshops or watched all recordings. In other words, it only works if you put in the effort to use it!
Also, if you want to read my more in-depth review of School of PE, you can check it out right here.
School of PE Pass Rates for the Civil PE
School of PE Pass Rates for Civil PE Oct. 2020 Administration
| Discipline | First Timers Pass Rate | Repeat Takers Pass Rate |
|---|---|---|
| Water | 92% | 78% |
| Structural | 88% | 79% |
| Geotech | 87% | 76% |
| Construction | 90% | 72% |
| Transportation | 92% | 74% |
These numbers mean that your chance of passing the Civil PE if you take School of PE on your first attempt are about 90%!
That’s a good reason to jump on it right away because that goes down to about 75% if you have to take it again. This number does include all repeat test-takers, even those who have taken the PE multiple times. So your chances may be slightly higher if it’s only your second attempt.
This is amazing, but how does it stack up against the national average? Let’s take a look at those numbers:
National Average Pass Rates for Civil PE Oct. 2020 Administration
| Discipline | First Timers Pass Rate | Repeat Takers Pass Rate |
|---|---|---|
| Water | 71% | 46% |
| Structural | 64% | 41% |
| Geotech | 55% | 24% |
| Construction | 61% | 35% |
| Transportation | 70% | 39% |
So if you’re taking the Civil PE for the first time without School of PE, you’ve got about a 64% chance of passing. If you’re taking it for the second time or more, that drops to 37%!
That means that with School of PE you increase your chances of passing by 40% if you’re a first-timer and 102% if you’re making a second attempt or more! In other words, if you’ve failed the PE at least once, you double your chances of passing if you take School of PE for your next attempt.
I was in that second category because I failed the PE on my first attempt. By taking School of PE’s review course I boosted my chances of passing and it worked! The best part was that I had a ton more confidence on the second try, and I’d even say the morning session was easy.
More on this later though, let’s take a look at the Mechanical PE and the FE.
School of PE Pass Rates for the Mechanical PE
School of PE Pass Rates for Mechanical PE Dec. 2019 Administration
| Discipline | First Timers Pass Rate | Repeat Takers Pass Rate |
|---|---|---|
| HVAC & Refrigeration | 89% | 74% |
| Machine Design & Materials | 88% | 72% |
| Thermal & Fluid Systems | 88% | 74% |
The average pass rate for School of PE finishers comes out to about 88% across all mechanical disciplines for first-timers and 73% for repeat takers.
Now let’s compare this to the average:
National Average Pass Rates for Mechanical PE Dec. 2019 Administration
| Discipline | First Timers Pass Rate | Repeat Takers Pass Rate |
|---|---|---|
| HVAC & Refrigeration | 69% | 37% |
| Machine Design & Materials | 68% | 40% |
| Thermal & Fluid Systems | 68% | 34% |
These numbers average out to a 68% pass rate for first timers and a 37% pass rate for repeat takers, across all mechanical disciplines.
That means with School of PE you increase your chances of passing by 30% if it’s your first attempt, and 97% if it’s your second attempt or more. So similar to the Civil PE, with School of PE you’re twice as likely to pass the Mechanical PE if you’ve failed the PE once or more!
School of PE Pass Rates for the FE
School of PE Pass Rates for the FE in 2021
| Discipline | Pass Rate |
|---|---|
| Civil | 92% |
| Mechanical | 87% |
| Electrical & Computer | 91% |
| Chemical | 87% |
| Industrial & Systems | 89% |
| Environmental | 90% |
| Other Disciplines | 90% |
Averaging this across all disciplines we get an 89% pass rate for the FE with School of PE.
Now let’s compare this with the average:
National Average Pass Rates for FE October in 2021
| Discipline | Pass Rate |
|---|---|
| Civil | 69% |
| Mechanical | 75% |
| Electrical & Computer | 72% |
| Chemical | 74% |
| Industrial & Systems | 65% |
| Environmental | 76% |
| Other Disciplines | 68% |
Averaging across all disciplines once more gives us about a 61% pass rate for the FE without School of PE. That means with School of PE you increase your chances of passing the FE by 46%!
My Experience With School of PE
I still remember how awful it was to see that I had failed my first attempt at the PE exam. Getting the email that my results were ready was exciting, and then it was a huge letdown. All that work for nothing! Or so it seemed.
I really just needed to learn how not to study for the PE so I could crush it on my second attempt!
For my second try at the PE exam, I really had to pass, so I went all in and invested in myself by buying School of PE’s review course. It was phenomenal. I was blown away at how well put together and thorough it was.
The ondemand video instruction was like being in a classroom and it made me feel confident that I was learning everything I needed to know to pass the PE exam.
There were dozens of concepts that I had no idea how to solve from my first attempt. Trying to teach myself while studying that first time was a mess, and it didn’t work because I failed!
Everything I had missed on my first try was covered with School of PE and then some.
I got everything I needed to pass the PE and felt way more confident. Plus, I had a ton of study material, including hundreds of practice problems to work that were the most similar to the actual exam of most other practice problems!
When test day came around, I was so much more confident that the morning session felt easy. Not a single problem surprised me. I had the right notes or almost identical practice problems from School of PE, so nothing caught me off guard.
The afternoon session was still tough but I felt far better about it than I had on my first attempt.
I cannot recommend School of PE enough for everything it gives you. But the level of confidence that it gives you going into the exam is just on another level. That alone makes it worth the cost.
I firmly believe that I’m a PE today because of School of PE. I don’t believe I would have passed without it and consider it an absolute must if you want to pass the PE on your next attempt.
I wrote a more in-depth review of School of PE which you can check out right here. And if you’re ready to jump in, click here to go to School of PE’s website and start a free trial to check it out!
Just a quick word of advice though: if you do get the free trial it only includes a few video lectures which does not begin to do the entire course justice. I did the free trial on my first attempt and didn’t think it was worth purchasing, but after buying it and seeing what was inside I regretted that decision!
Also, if you’re worried about the cost, they have really affordable payment plans now!
Wrapping Up
If you want to pass the PE or FE exam, take School of PE’s review course. You’ll significantly increase your chances of passing, and even double them if you’ve failed the PE once already!
It may seem like a lot of money, but it’s worth investing in yourself and your career to get you one step ahead by becoming a licensed Professional Engineer!